40L CylinderValve: QF-2CVolume: ~40LDiameter: 219 Mm Working Pressure: 150 BarTesting Pressure: 250 BarColor : blue10L CylinderValve: QF-2CVolume: ~10LDiameter: 152 MmWorking Pressure: 150 BarTesting Pressure: 250 BarColor : blueN2O gas specification
Specification |
Certified concentration |
Analytical method |
N2O |
≥99
|
≥99
|
% |
HG2685-1995 |
CO |
≤10 |
≤10 |
ppm |
|
CO2 |
≤250 |
≤250 |
ppm |
|
H2O |
≤100 |
≤100 |
ppm |
|
NO-NO2 |
≤0.5 |
≤0.5 |
ppm |
|
N2 |
≤25 |
≤25 |
ppm |
|
NH3 |
≤5 |
≤5 |
ppm |
|
1, Since 2010 year, we produce 99.999% and 99.995% helium were 99.9% and 99.999%, 99.9% and 99.999% of the laughing gas, the carbon monoxide were 99.9993% and 99.999%, 99.9993% and 99.999% of argon gas, and 99.995% hydrogen, 99.995% and 99.999% nitrogen, 99.999% and 99.99% were 99.999% and 99.995% and 99.999% of carbon dioxide, methane, 99.999% and 99.998%, and 99.999% of the oxygen, or more than 99.9% of acetylene, and so on.
2. Before filling: heating with the first step of the cylinder, the second step is to dry the moisture inside the cylinder, the third step to open the cylinder calabash valve pumping air into vacuum state, the fourth step play 0.3 to 0.5 mpa raw material gas chromatography to test, test impurities, this step is to test both sides can enter the next step aeration process.
.
pay attention to that before use, please open a little bit of the valve and blew the ash off the valve and piping on the grey, because impurities affect the purity of bottle.
So far our products are enjoying good markets at home and exporting to European and American countries, the Middle East countries, West Asia, as well as South and East Asia countries.
Specification of High Pressure |
GB5099 Standard or ISO9809 |
Type |
Outside Diameter Do.(mm) |
Water Capacity (L) |
Height (without valve) (mm) |
Weight (without valve cap)W(kg) |
Material |
Standard |
WMA108-1.4-15 |
108 |
1.4 |
238 |
2.96 |
37Mn |
GB5099-3 |
WMA108-2-15 |
108 |
2.0 |
320 |
3.75 |
WMT108-2-15 |
108 |
2.0 |
317 |
3.72 |
WMA121-3.2-15 |
121 |
3.2 |
390 |
5.02 |
WMT121-3.2-15 |
121 |
3.2 |
385.8 |
4.98 |
WMA121-4-15 |
121 |
4.0 |
485 |
6.16 |
WMT121-4-15 |
121 |
4.0 |
470 |
5.95 |
WMA140-4-15 |
140 |
4.0 |
372 |
5.77 |
WMA140-5-15 |
140 |
5.0 |
458 |
7.52 |
WMA140-6.3-15 |
140 |
6.3 |
524 |
8.72 |
WMA140-7-15 |
140 |
7.0 |
593 |
9.84 |
WMA140-8-15 |
140 |
8.0 |
671 |
10.72 |
WMA140-10-15 |
140 |
10 |
845 |
13.4 |
WMA152-7-15 |
152 |
7.0 |
528 |
9.57 |
WMA152-8-15 |
152 |
8.0 |
600 |
10.66 |
WMA152-10-15 |
152 |
10.0 |
726 |
12.6 |
WMA159-10-15 |
159 |
10.0 |
685 |
14.15 |
WMA159-12-15 |
159 |
12.0 |
800 |
16.34 |
WMA159-15-15 |
159 |
15.0 |
975 |
19.66 |
WMA219-20-15 |
219 |
20.0 |
730 |
29.00 |
WMA219-40-15 |
219 |
40.0 |
1310 |
48.00 |
WMA232-40-15 |
232 |
40.0 |
1220 |
50.00 |
WZA232-47-15 |
232 |
47.0 |
1360 |
51.00 |
WMA219-50-15 |
219 |
50.0 |
1600 |
57.00 |
WMA232-50-15 |
232 |
50.0 |
1380 |
65.00 |
IWGA219-40-15 |
219 |
40.0 |
1380 |
52.00 |
34CrMo4 |
ISO9809-1 |
IWGA232-40-20 |
232 |
40.0 |
1170 |
52.00 |
IWGA232-47-20 |
232 |
47.0 |
1360 |
55.00 |
IWGA232-50-20 |
232 |
50.0 |
1440 |
56.00 |
Note:1.WMA-Concave Bottom WMT-Convex Bottom 2. Hydraulic test pressure: 25Mpa or 30Mpa 3. Working test pressure: 15Mpa or 20Mpa |
|